Water Pressure Pumps

Are you looking for alternate Water Pressure Pumps?

The use of Water Pressure Pumps gives strong, constant water supply for everyone comfort and convenience.

Normal standard features of any Water Pressure Pumps normally able to provides constant flow and stable water pressure to easily three to four outlets at one time with ease.

Other features is the built-in bypass design recirculates the back pressure back into the pump to reduce unwanted cycling when the pump is restricted, which results in quieter and smoother flow.

The performance of a industrial pressure pump varies depending on how much water the pump is moving and the pressure it is creating. This is an important relationship not only because it determines whether the pump is suitable for your usage, but also allow you to control the operation of the pump.

The primary relationship to understand is that as the flow INCREASES, the pressure DECREASES. Here are the standard formulas used to estimate flow, pressure, and horsepower for most of industrial water pressure pumps.

Note: these formulas have been simplified to assume a pump efficiency of 55% which is a good average figure to work with if you don't know the exact efficiency of your pump. Pressure for water pumps is always (in the U.S.A. that is!) measured in feet of head, one foot of head is equal to 0.433 pounds per square inch. The formula is:

FT.HD. = HP x 2178 / GPM

GPM = HP x 2178 / FT.HD.

HP = GPM x FT.HD. / 2178

HP is brake horsepower

GPM is gallons per minute of flow

FT.HD. is pressure in feet of head (PSI x 2.31 = FT.HD.)

Delicious Digg Facebook Stumbleupon Twitter